@kasenri/dsh-orbit

This repository is an installable release mirror for @kasenri/dsh-orbit 0.6.7. Canonical source: https://github.com/KasenRi/dsh-orbit-browser-plugins/tree/main/packages/orbit Do not develop features here; publish changes from the canonical source monorepo. Community plugin for DeepSeek Harness (DSH). Not affiliated with or endorsed by DeepSeek.

让 AI 不只是“连续回答”，而是按照一个可恢复、可审核、有边界的工程流程把任务真正做完。

Orbit 是一个面向 DeepSeek Harness 的确定性长任务编排器。它把“规划、执行、审核、纠错、恢复、最终验收”拆成明确角色，并把真正的流程控制权留在 Supervisor，而不是交给模型自由循环。

从 v0.6.x 开始，Orbit 还可以选择性接入 MoA 多候选执行：当某个关键步骤存在多种合理实现路线时，Orbit 可以让多个 Candidate 独立给出方案，再由 Judge 做相对选优，最后仍由 Orbit 写回、真实验证并由 Commander 最终验收。

从 v0.6.2 开始，Commander 与 Executor 在同一个 Run 内默认使用 Persistent Role Sessions：PLAN、Step Review、Final Review 会继续同一个 Commander Session；权限集合不变的连续 Step 会继续同一个 Executor Session。这样角色无需在每次交接时重新理解项目。只有权限变化、Watchdog 要求重启、Commander 显式请求 RESET、恢复失败或异常时，Supervisor 才会确定性轮换角色 Session。Watchdog、MoA Candidate 和 Judge 仍保持一次性隔离调用。

从 v0.6.3 开始，Orbit 增加 Trusted Execution Evidence：Supervisor 会从已结算的 DSH tool/call + tool/result 中确定性提取真实工具结果摘要、exit code 和测试证据，并能识别 run_code 内字面 tools.bash({ command: ... }) 的嵌套 shell 命令。Commander 会明确区分 [TRUSTED_TOOL_EVENTS] 和 [EXECUTOR_SUMMARY_UNVERIFIED]，避免已经有真实 stdout / exit code / test summary 时仍重复申请 shell 或要求 Executor 把证据写入临时文件。

从 v0.6.4 开始，Watchdog 变为 Heartbeat Watchdog：保留原有 runtime/timeout/guard/strategy 的即时触发，同时默认每 120 秒主动巡检一次 Commander、Executor 或 MoA 活跃阶段。Heartbeat one-shot 不继承自己的历史，不消耗 loop，不占 runtime Watchdog cap；Supervisor 会记录 meaningful progress 和事件年龄，并用状态指纹丢弃 stale Watchdog 决策。最终关闭也必须经过 FINAL_VERIFY → FINAL_AUDIT → TERMINAL_CONFIRM：只有 Final Watchdog 批准、Commander 真正调用 orbit_run_complete({ signal: "COMPLETE" })，且 Supervisor 的机械关闭条件全部满足，Run 才进入 SUCCESS / CLOSED。

v0.6.5 修复真实 Web Profile Live Apply 发现的 Session 持久化兼容问题：当前 DSH 尚未给第三方插件开放 Session.append() 的 ignorable: true envelope 写入接口，因此未知的 orbit/runtime 自定义事件会让冷读取 reader 拒绝整个 Session。Orbit 现在只在 Harness 原生识别 orbit/runtime 时才写该事件；否则跳过 Session runtime projection，以 .cx 下的 Orbit durable state 作为权威来源，避免污染聊天 Session。

v0.6.6 把 Orbit Run 从“项目唯一”升级为 Session-scoped Runs。每个 DSH Session 都有独立的 .cx/sessions/<session-key>/state.json、Run ID、persistent Commander / Executor 和 NEEDS_USER 状态；一个会话的活动 Run 不再阻止另一个会话在同一项目启动 Orbit。旧 .cx/state.json 会由其 owner_session_id 所属 Session 在下一次写入时自动迁移。多个 Session 共用同一个物理 checkout 时，可写 Executor turn 会按 workspace 串行，保留 mutation safety。

v0.6.7 补齐显式 resume 的 Session 透传：NEEDS_USER 恢复重新进入 run() 时继续使用同一个 owner_session_id，避免工具调用路径依赖隐式 initiator 上下文。

核心能力

• Commander：负责计划、步骤审核、最终审核和策略调整；一个 Run 内默认持续使用同一个 Commander Session。
• Executor：一次只执行当前 Step，并负责真实工具调用与验证；权限集合不变时跨 Step 复用同一个 Executor Session。
• Heartbeat Watchdog：异常时即时介入，并周期主动巡检长执行是否仍在健康推进；Watchdog 本身始终 one-shot。
• Durable State：每个 DSH Session 的 Run 独立持久化到 <project>/.cx/sessions/<session-key>/state.json，支持冷恢复；旧 .cx/state.json 兼容迁移。
• Bounded Loop：Plan、Correction、Watchdog 和 Append 都有明确上限。
• Route Freeze：Run 创建后冻结角色模型与 Reasoning，中途改 UI 只影响下一次 Run。
• Persistent Role Sessions：Commander / Executor 会话身份、轮次、轮换次数和 Token 使用写入 durable state；正常交接不重新创建角色。
• Mutation Fence：多个 Orbit Session 可以共存；同一物理 checkout 的可写 Executor turn 串行，非 Orbit 顶层 mutation driver 仍与活动 Orbit workspace 互斥。
• 可选 MoA：高不确定 Step 可以走 2–4 候选 + Judge 的多方案竞争。
• 可选 Browser：需要真实网页操作时再配合 @kasenri/dsh-browser。

核心状态机：

PLAN → EXECUTE → EVALUATE → CORRECT / RECOVER → FINAL_VERIFY → TERMINAL_CONFIRM → SUCCESS

普通 SINGLE Step：

Commander
   ↓
Executor
   ↓
真实测试 / Evidence
   ↓
Commander
   ↓
PASS / CORRECT / NEEDS_USER

MoA Step：

Commander
   ↓
Candidate 1 ─┐
Candidate 2 ─┼→ Judge → Winner
Candidate 3 ─┘              ↓
                    Orbit 受控写回
                           ↓
                        Executor
                           ↓
                        真验证
                           ↓
                       Commander

MoA 是可选能力，不随 Orbit 自动安装

只安装 Orbit，就可以正常使用完整的 SINGLE 模式。

如果你希望在 Orbit 中开启：

MoA 多候选模式

需要自行另外安装 @goodandready/dsh-moa：

dsh plugin --profile web add @kasenri/dsh-orbit
dsh plugin --profile web add @goodandready/dsh-moa

Orbit 当前接受：

@goodandready/dsh-moa >= 0.2.19

已在真实 DSH 环境验证：

0.2.19  ✓
0.2.20  ✓

更高版本不会被 Orbit 主动设置上限。如果上游未来发生真实 API 不兼容，再按实际故障修复。

安装 MoA 后，在 Orbit 菜单中打开：

MoA 多候选模式      [开关]  >

进入二级菜单配置候选数量、Candidate 模型、Judge、Reasoning、候选互评和每个 Run 最大 MoA Step 数。

开启 MoA 不代表每个 Step 都会运行多个模型。 Commander 仍然可以让普通步骤走 SINGLE，只在适合的高不确定步骤选择 MOA。

Orbit 与 MoA 的职责边界

Orbit 集成 MoA 后，顶层控制权不会改变：

• Orbit Supervisor 仍然是唯一流程控制者。
• Candidate / Judge 都是零工具模型调用，不能直接修改项目。
• 候选方案只写入 .cx/moa/<run>/<step>/candidate-N/。
• Judge 只能从已有成功候选中选择 Winner，不能自己生成新的“第四方案”。
• Judge 只做相对选优，不能决定 PASS_CURRENT_STEP。
• Winner 由 Orbit Supervisor 受控 Promotion 到项目目录。
• Promotion 后仍然必须让 Executor 做真实测试。
• 最终仍由 Commander 决定 PASS / CORRECT / NEEDS_USER。
• Orbit ACTIVE 时会阻止独立 /moa 抢占同一 workspace。

因此可以把两者理解成：

Orbit 决定任务怎么走；MoA 只负责在困难步骤里多想几个答案再选一个。

Requirements

Component	Tested with
@deepseek-ai/dsh	0.1.5-rc.2
@deepseek-ai/cordis	4.0.2
@goodandready/dsh-moa（可选）	>=0.2.19；已验证 0.2.19、0.2.20
Node.js	>= 22.19.0

Requires the DSH base services: agents, subagents, tools, sessions (the standard/web profile provides them).

Install

Install the current stable Git source so DSH can compare the locked commit with repository HEAD:

dsh plugin --profile web add github:KasenRi/dsh-orbit

The canonical source monorepo also keeps versioned GitHub Release tarballs for manual or offline installation.

Usage

The orbit_controller tool drives the run:

Action	Meaning
run / start	Start a run for a goal (or continue the current one).
resume	Continue the persisted run after an interruption.
status	Inspect phase, plan, loop budget and last error.
stop	Close the run.
doctor	Read-only environment and configuration checks.

// orbit_controller
{
  "action": "run",
  "goal": "…",
  "approved_loop_count": 4,
  "user_hard_constraints": ["only touch src/"]
}

Activation

Orbit supports three activation styles:

1. /agent-orbit <goal> — deterministic slash-command activation. In the Web GUI it appears in the / menu (使用 Orbit 确定性工程编排执行目标); on headless/CLI surfaces a genuine user message that starts with /agent-orbit activates Orbit directly. The original command line stays visible in the conversation, the goal is passed through without rewriting, and no goal asks for one instead of starting an empty run.
2. orbit模式 — recommended natural-language activation, e.g. “用 orbit模式完成这个项目”.
3. cx模式 — legacy compatibility; still resolves to Orbit.

All three routes converge on the existing orbit_controller tool and OrbitService; the activation layer never starts a run of its own. After a hard-activated run reaches SUCCESS, the initiating Session displays the Final Commander's user-visible result directly, with the Commander's frozen provider/model provenance. The parent model and parent tools remain bypassed.

Model configuration (Web)

The Orbit model control is the final entry in conversation.input.right, so other composer-side controls (for example DSH's rollback control) stay to its left while the native conversation.input.model seat stays immediately to its right. Its button names the Commander's model. The first-level menu stays compact: Orbit toggle, Commander, Executor, Watchdog, and one MoA 多候选模式 entry. All Candidate/Judge details live in the MoA second-level menu.

• Commander and Watchdog pick from the same native model catalog and persist into the DSH orbit settings namespace (settings.yaml). Picking a model first opens reasoning selection; nothing is saved until the user chooses a catalog-declared effort or provider default. No effort is inferred.
• Executor follows the current session model ("Follows current session model"). Both the Orbit row and the native seat read and write the SAME per-session ModelDirectory, so a change in either place updates the other.
• MoA Candidate / Judge routes appear only inside the MoA second-level menu. Candidate count and max-MoA-step values use explicit selectors instead of click-to-cycle controls.

A new run resolves its routes exactly once — Commander/Watchdog from orbit settings, Executor from the initiating session's current selection — and freezes them into state.routes. Orbit ships no provider/model or reasoning defaults. Changes made while a run is active apply to the next run; resumed runs keep their frozen routes. Explicit profile routes are permitted for headless/CLI: Commander/Watchdog use settings then explicit config; Executor uses the Session selection, with explicit config only when there is no Session. Missing or unavailable roles block creation of a Run before any child starts.

Optional MoA execution mode

需要额外安装 @goodandready/dsh-moa。只安装 Orbit 时，SINGLE 模式仍然完整可用。

Orbit 可以把少量高不确定性步骤标记为 execution_mode: "MOA"。这不是新的顶层 Supervisor，也不会把状态机交给 MoA：

Commander PLAN
      ↓
SINGLE ─────────────→ Executor
      \
       MOA → Candidate 1 ─┐
             Candidate 2 ─┼→ Judge → Orbit controlled promotion → Executor verification
             Candidate 3 ─┘
                                              ↓
                                      Commander STEP_EVALUATE

关键边界：

• Candidate 和 Judge 都是零工具的一次性模型调用，不能直接 write/edit/bash/subagent。
• 候选文件只写入 .cx/moa/<run>/<step>/candidate-N/，普通 Executor 不能修改 .cx。
• Judge 只负责在已有候选中做相对选择，必须返回 WINNER_CANDIDATE_INDEX；它不能决定 PASS_CURRENT_STEP，也不能生成新的综合实现。
• 胜出候选由 Orbit Supervisor 确定性提升到项目目录；之后仍由 Executor 运行真实测试，最后由 Commander 做绝对验收。
• 整个 MoA Step 只消耗一个 Orbit loop；候选和 Judge 的内部调用受独立的候选数和 maxMoaSteps 限制。
• 候选数固定为 2–4；至少需要 2 个成功候选。失败不会偷偷回退成单 Executor，也不会自动换 Judge 模型。
• peerCritique 默认关闭；开启时只允许一轮有界互评。
• 新 Run 会冻结 Candidate/Judge 的 provider、model、reasoningEffort、MoA policy，以及原版 MoA settings 中用户显式配置的价格表（如果存在）。中途修改 UI 只影响下一次 Run。
• Candidate/Judge 的 input/output/cache Token 来自 DSH 子 Session 的真实 assistant/message.usage；如果冻结的价格表能匹配对应 Route，同时记录美元成本；没有价格时只展示 Token，并明确标记无法计算成本，不猜价格。
• Orbit 会把一个不含目标正文、候选正文、Judge 推理或代码的有界运行快照写进所属 DSH Session projection。v0.6.1 的配置首页不再直接展开这些运行详情，而是保持紧凑；运行快照仍保留给会话恢复与后续运行态界面使用。
• 冷恢复按 durable phase 继续：JUDGE 不重跑 Candidate，SELECTED 不重跑 Candidate/Judge，PROMOTED 不重跑 Candidate/Judge/Promotion。
• Orbit ACTIVE 时会在下游 hook 之前阻止独立 /moa，避免原版 MoA 的自动 Promotion 与 Orbit 同时争夺 workspace。
• @goodandready/dsh-moa 是可选依赖；未安装时普通 SINGLE 模式完全不受影响。

当前兼容层接受 @goodandready/dsh-moa >=0.2.19，并已在 0.2.19 与 0.2.20 上完成真实 DSH 烟雾验证。更高版本不再被 Orbit 主动版本上限拦截；若上游未来发生实际 API 不兼容，再按真实故障修正。Orbit 只依赖它公开的项目上下文接口；候选调度、Judge、持久化与 Promotion 权限均由 moa-adapter.ts 封装。

State machine

PLAN → EXECUTE → EVALUATE → SUCCESS
                     │
                     ├─ correction (bounded per step)
                     ├─ append (bounded by remaining loop budget)
                     ├─ NEEDS_USER
                     └─ BUDGET_EXHAUSTED

• Only a normally completed Executor step consumes one loop from the budget.
• Runs without an explicit user/tool budget start from the historical floor of 5 loops; after PLAN, Orbit deterministically reserves two extra bounded slots beyond the accepted base plan (max(5, steps + 2), therefore at most 7 for the 1–5-step plan schema). Explicit approved_loop_count / max_loops values are never enlarged automatically.
• Corrections are limited per base step and reserve budget for the remaining planned steps.
• Commander decisions are validated in code (PASS_CURRENT_STEP / CORRECT_CURRENT_STEP / NEEDS_USER for step evaluation, SUCCESS / APPEND / NEEDS_USER for final evaluation, KEEP_APPROACH / REPLACE_CURRENT_STEP / NEEDS_USER for strategy reconsider).
• Commander runs under an adaptive timeout: a soft review at 360s, a second review at 600s and a deterministic hard ceiling at 840s; an extension always keeps the same child.
• The Smart Watchdog is only invoked on runtime anomalies, performs at most two diagnoses per step, and can resume the same child or restart the step with a fresh one after interrupting the old child.
• Blocked tools are recoverable: a guard denial stops that single call, not the turn or the run.

Safety boundaries

• Commander and Watchdog receive read-only tool allowlists.
• Executors always receive only base read tools (read/read_image/glob/grep). Each Step explicitly declares filesystem, shell, web, or browser to add only the corresponding tools. Legacy web-api-recon normalizes to web plus browser. No capability means no bash, writers, web, or browser tools.
• While Orbit owns a workspace, other top-level autonomous drivers (create_goal, ralph, workflow) are refused, and Orbit refuses to start while an active Goal driver owns the same workspace. Only an Orbit-owned Executor child can use mutation tools while Orbit owns that workspace.
• Bounded, redacted step_results preserve each Step's summary, changes and test evidence. Cold resume retains them and FINAL_EVALUATE sees every Step.
• .cx durable state is written only by the Orbit service (atomic write, short lock transaction, monotonic revision).

Configuration

Key	Default	Meaning
projectDir	session cwd	Project the run operates on.
routes.commander	none	Explicit profile fallback; normally user-selected in Orbit settings.
routes.executor	none	Explicit config only without a Session; otherwise follows DSH Session selection.
routes.watchdog	none	Explicit profile fallback; normally user-selected in Orbit settings.
moa.enabled	false	允许 Commander 为关键步骤选择 MOA 执行模式。
moa.candidateCount	3	固定候选数量，运行时只允许 2–4。
moa.candidates	none	用户显式选择的 Candidate routes；不会从 Executor 猜测或继承。
moa.judge	none	用户显式选择的 Judge route。
moa.peerCritique	false	是否启用一轮有界候选互评。
moa.maxMoaSteps	2	一个 Run 最多允许的 MoA 步骤数（上限受 1–5 步 Plan 约束）。
MoA prices	none	若 dsh-moa settings 已配置 prices，Orbit 在新 Run 冻结该表并据真实 Token 计算成本；否则不估价。
executorTools	read/read_image/glob/grep	Base read-only subset; mutation tools require Step capabilities.
browserTools	["agent_browser"]	Browser capability tool names.
commanderReadOnlyTools	read/glob/grep/web…	Commander allowlist.
watchdogTools	read/glob/grep	Watchdog allowlist.
executorTimeoutMs	480000	Deterministic executor runtime timeout.
registerTool	true	Register the orbit_controller tool and the legacy cx_controller alias.
registerGuards	true	Register recoverable tool guards.
slashCommand	true	Register the /agent-orbit host command and the gesture boundary.

Routes are normal DSH model routes; configure them for your own provider and model identifiers. No credentials are included in this package.

Optional browser capability

Orbit does not depend on @kasenri/dsh-browser. A plan step that declares capabilities: ["browser"] needs the agent_browser tool to be registered by the browser plugin; otherwise Orbit reports BROWSER_CAPABILITY_UNAVAILABLE and lets the Commander decide what to do. Install both packages to use that path:

dsh plugin --profile web add github:KasenRi/dsh-browser
dsh plugin --profile web add github:KasenRi/dsh-orbit

Migrating from dsh-cx

CX	Orbit
dsh-cx	dsh-orbit
@kasenri/dsh-cx	@kasenri/dsh-orbit
cx_controller	orbit_controller
CX mode	Orbit mode (orbit模式; cx模式 still works)
ctx.cx	ctx.orbit (same OrbitService instance; ctx.cx remains an alias)

• v0.6.6 起新 Run 使用 .cx/sessions/<session-key>/state.json；旧 .cx/state.json 继续可读，并在所属 Session 下一次正常写入时迁移。状态 schema 仍为 5（包含 role_sessions、meaningful progress、heartbeat_watchdog、terminal_confirmation 等）。旧 schema 2/3/4 状态仍可读取并正常升级。
• Legacy cx模式 remains supported.
• Existing durable runs do not need migration: Orbit reads the same Orbit durable state, including legacy .cx/state.json and historical CX_* error strings.
• .cx is retained as the durable execution state path for backward compatibility with existing CX projects.

License

MIT